Skip to main content

Jobs in AAC Plants

We request all the employers of AAC Plants to post their openings. 
You can get the quality employees from countries like Italy, Germany, India, etc., as this site is dedicated especially for AAC Plants.
Please mail the details to aacblockshyd@gmail.com.

 Business Development Manager - AAC Block Jointing Mortar (Value Pack India Private Limited) at Hyderabad, India


 Jobs in NCL Buildtek Limited, AAC Plant, Nellore, India

Comments

  1. sanjayroy4 December 2021 at 11:31

    BuildMate is a strong technology-oriented, high-tech engineering project and execution company providing technology and supply of machinery and equipment for Building Material projects. We are among the top manufacturers in the world for AAC Plants and have considerable experience in creating other building material plants and machinery.

    ReplyDelete

Post a Comment

Popular posts from this blog

Recipe Calculation for AAC Blocks

Recipe is nothing but knowing the dry weight (batch weight) of one batch or one cake. To find out dry weight, we should know the desired dry density of final block. Let us work on the density of 600 kg/m³. Batch Weight = Density x Mould volume Density = 600 kg/m3 Dimensions of the mould : Length = 4840 mm = 4.84 M Width = 1250 mm = 1.25 M Height = 670 mm = 0.67 M Volume of the mould: 4.84 M x 1.25 M x 0.67 M = 4.0535 M³ Batch Weight = 600 x 4.0535 = 2432 kg (We have taken mould height 670 mm, which is actually depth of the mould. Generally we maintain the cake height equal to mould level. But in some AAC factories, cake height may be 650 mm or 680 mm depending on the parameters like quantity of returns required, sinking of cake, uneven surface of the cake, etc., In this case cake height should be taken to calculate the volume.) Batch weight or Dry weight consists of binders (Cement and Quicklime), Fly ash or Sand, returns and anhydrite. Usually th
7 comments
Read more

What is Aluminium Powder? Why it is used in AAC Plants?

  Aluminium Metal powder or paste Aluminium powder, which is commonly used as a reaction agent in AAC Plants, is a fine granular powder made up of Aluminium Metal. Process of Manufacture: The aluminium powder is usually manufactured in many forms such as flaky particles, granulated powder (atomised aluminium) etc. There are different processes one can use for the production of aluminium powder. The metal is melted in furnaces, and the temperature is maintained around 720 to 760 C. Atomised Aluminium is produced by blasting the stream of molten Aluminium into small articles by air jet. For this purpose, an atomiser is employed which consists of a straight tube with lower end dipped in molten metal and upper end terminating as a little orifice. A jet of hot air under pressure is passed through armular opening near the top which impinges on a stream of molten Aluminium drawn by suction through the orifice. This results in the formation of small particles of Aluminium. Th
17 comments
Read more

AAC vs Non AAC Blocks

  Why Autoclaving is required when Non Autoclaved Aerated Concrete Blocks are available in the Market? The matrix and the firmness of the AAC products are made due to autoclaving.  AAC vs Non AAC Blocks Technically, such product will start cracking by itself  when it approaches equilibrium moisture content  after a couple of years. In the case of ordinary concrete products, there are  no shrinkage troubles during the drying operation. But in foamed or aerated concrete the mixture is air  and if manufactured without autoclaving, drying  shrinkage will cause cracking. The calcium silicate hydrates formed during  autoclaving is more stable than the one formed of  cement at room temperature. Autoclaved products have low shrinkage. Cement will need four weeks to achieve its final  strength at room temperature whereas, autoclaving  takes only 12 hours. to get desired strength. The mechanical strength will not be very high and  through the drying, the shrinkage is going to be  excessive. It i
2 comments
Read more