Skip to main content

Addage Soluble Oil For AAC Blocks - Sakshi Chem Sciences Private Limited

Addage Soluble Oil is used in manufacturing echo friendly products like light weight Autoclaved Aerated Concrete Blocks..

Having competitive market of AAC, to minimize the cost of production and percentage of reduction in rejection of moulds, enhance us to develop different grades of soluble oils. 

These oils play important role in controlling rate of reactions between various ingredient like lime, silica, cement from fly ash etc. to meet the growing demands of today and future for ever evolving construction industry, We have developed a product called ADDAGE SOLUBLE OIL.

In manufacturing AAC block, during casting or green stage, controlling rate of reaction between various raw materials like aluminium powder, quick lime and silica from fly ash and cement etc is predominant to the stability of mould. 

ADDAGE SOLUBLE OIL is a liquid admixture miscible in water and designed to suit the different quality of fly ash.

ADDAGE SOLUBLE OIL catalyst as well as retardant based on fineness of fly ash quality. Chromium based De– oxidants are hazardous to health and banned for their carcinogenic nature in domestic use. 

ADDAGE SOLUBLE OIL contents a Plasticizer either a non-surface active polymer or usually a blend of all to improve the separation of particles and to prevent settling group of light particles available in raw materials like Fly Ash, Aluminium Powder, and quick Lime Etc.

It also contains mixture of some polymer to enhance Strength of cell walls at wet stage inside the mass during reaction between water and Metal Powder as well as liberation of H2 gas by increasing the surface tension of mass.

Surface tension plays a very important role as barrier in mould shrinkage as impurities like High carbon in fly ash affects the rate of reaction between various reactants like Lime (from cement & mixture) and Silica ( From Cement & Fly ash) which results in 1:1 nm Tobermorite( Calcium Silicate Hydrate ) which is principal final product (due to reaction between silicate phases of Portland cement and water) of AAC. 

Improper mixing of various ingredients in the formulation may results in unreactive Calcium Hydroxide which gives less than optimum block strength and also Lattice Shrinkage.

Benefits:
  1. Reduction in Mould shrinkage related Rejections
  2. Not hazardous to health like chrome based de- oxidant
  3. Sustainable and eco friendly product
  4. Increased profitability by increasing productivity and reducing percentage rejection.
Technical Specification:

1) Ph:                                    > 10
2) Appearance:                      Hazy Liquid
3) Odour:                             Characteristic
4) Fire& Hazard explosion:    Non - Inflammable
5) Sp.gravity:                         0.98 -1.02
6) Viscosity At15 Deg C:                 10 - 20 sec by B4 Cup Method.

Directions To Use:

Shake Well before use. ADDAGE SOLUBLE OIL is to be mix after pouring Slurry & water in to the mixture but  before dry material for homogeneous mixing in the mix. ADDAGE SOLUBLE OIL works at room temperature.

Dosage:  3 Ltrs Per Meter Cube.

Packaging: - 200 Ltrs Barrel

Storage: - 
Store at room temperature and keep away from strong Oxidizer like Potassium Permanganate and combustible material.

Shelf Life: - 12 Months from the date of manufacturing.

Sakshi Chem Sciences Private Limited

Mr. Sandip Agrawal
2nd Floor, Vishal Furniture,
Opposite Police Station, Sitabuldi
Nagpur - 440 012, Maharashtra , India

Phone: +(91)-(712)-2980028, 9422 146 423
Email: enquiry@sakshichemsciences.com
 


Labels:

Comments

  1. Nityalife25 April 2022 at 11:07

    You are providing good knowledge. It is really helpful and factual to increase one's knowledge. Well you should check this out too certified immunity booster essential oils online. And again please continue sharing your data it's really helpful. Thank you.

    ReplyDelete
  2. Robert steveson30 April 2022 at 03:17

    This comment has been removed by the author.

    ReplyDelete
  3. Robert steveson30 April 2022 at 03:17

    You have provided valuable data for us. It is great and informative for everyone.Read more info about cbd oil nyc Keep posting always. I am very thankful to you.

    ReplyDelete
  4. Mackenzie Sarah18 June 2022 at 00:38

    This post is really awesome. Genuinely i like this blog. It gives me more useful information. I hope you share lots of things with us .cbd oil 100mg/ml

    ReplyDelete

Post a Comment

Popular posts from this blog

Recipe Calculation for AAC Blocks

Recipe is nothing but knowing the dry weight (batch weight) of one batch or one cake. To find out dry weight, we should know the desired dry density of final block. Let us work on the density of 600 kg/m³. Batch Weight = Density x Mould volume Density = 600 kg/m3 Dimensions of the mould : Length = 4840 mm = 4.84 M Width = 1250 mm = 1.25 M Height = 670 mm = 0.67 M Volume of the mould: 4.84 M x 1.25 M x 0.67 M = 4.0535 M³ Batch Weight = 600 x 4.0535 = 2432 kg (We have taken mould height 670 mm, which is actually depth of the mould. Generally we maintain the cake height equal to mould level. But in some AAC factories, cake height may be 650 mm or 680 mm depending on the parameters like quantity of returns required, sinking of cake, uneven surface of the cake, etc., In this case cake height should be taken to calculate the volume.) Batch weight or Dry weight consists of binders (Cement and Quicklime), Fly ash or Sand, returns and anhydrite. Usually th
7 comments
Read more

What is Aluminium Powder? Why it is used in AAC Plants?

  Aluminium Metal powder or paste Aluminium powder, which is commonly used as a reaction agent in AAC Plants, is a fine granular powder made up of Aluminium Metal. Process of Manufacture: The aluminium powder is usually manufactured in many forms such as flaky particles, granulated powder (atomised aluminium) etc. There are different processes one can use for the production of aluminium powder. The metal is melted in furnaces, and the temperature is maintained around 720 to 760 C. Atomised Aluminium is produced by blasting the stream of molten Aluminium into small articles by air jet. For this purpose, an atomiser is employed which consists of a straight tube with lower end dipped in molten metal and upper end terminating as a little orifice. A jet of hot air under pressure is passed through armular opening near the top which impinges on a stream of molten Aluminium drawn by suction through the orifice. This results in the formation of small particles of Aluminium. Th
17 comments
Read more

What is AAC? What are the properties of AAC? How AAC blocks are produced?

  Definition of AAC Blocks   AAC Blocks   A - Autoclaved A - Aerated C - Concrete   Autoclaved aerated concrete is a lightweight concrete containing uniformly distributed voids that is subjected to high-pressure steam curing.   Production of AAC Blocks   This is a light- weight building material produced by autoclaving a set mix of fine siliceous materials such as ground silica sand or flyash and the binders like Portland cement and lime. Lightness is achieved by incorporating a large proportion of closed microscopic pores in the slurry with the help of entraining or foaming agent. The basic raw materials are fine-ground sand or fly ash, cement, quicklime, anhydrite or gypsum, water, and aluminum  powder or paste as a rising component. A suitable mixture of these raw materials is poured into a mould, and the rising process starts due to the development of hydrogen gas formed by the reaction of aluminium in the alkaline suspension. After 20 to 40 minutes the maximum rising
41 comments
Read more